Parameter Change In Menus - Lenze Global Drive 8200 vector Instructions De Montage

8.2.4

Parameter change in menus

Action
1. Plug in the keypad
2. If necessary change to the menu "ALL"
3.
4.
5.
6. Inhibit controller
7. Set parameters
8.
9.
10.
11.
12.
13.
14.
L
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Parameter setting using the keypad
Keys Result Note

Function
setting: C0050 = output frequency).
xx.xx Hz
 Change to function bar 2
 
Select menu "ALL" (list of all codes)

all
Confirm selection and change to function bar 1

Only necessary if you want to change C0002, C0148, C0174 and/or C0469
 
 
Select code
 XXXX
  For codes without subcodes: Jump automatically to
001
Select subcode
 XXX
 
 Set parameters
XXXXX

STOre Confirm entry if

Confirm entry if
Restart the "loop" at 7. to set other parmeters.
Commissioning

is activated. The first code in the user menu will be displayed (C0517/1, Lenze


blinking
 
is not blinking; is not active
95
EDK82EV903 DE/EN/FR 2.2