Parameter Setting Using The Keypad; Menu Structure - Lenze Global Drive 8200 vector Instructions De Montage

Commissioning

Parameter setting using the keypad

8.2 Parameter setting using the keypad
The keypad is available as accessory. A full description can be obtained from the information
included in the keypad delivery.
8.2.1

Menu structure

All parameters for controller setting or monitoring are saved in codes under the menus User and all.
The codes have numbers  and are abbreviated in the text with a "C" before the number. Some codes
store the parameters in numerical "subcodes"  to ensure that parameter setting is clearly structured
(example: C0517 menu User).
•
The menu User
– is active after every mains switching or keypad attachment during operation.
– contains all codes for a standard application with linear V/f characteristic control (Lenze
setting).
– can be modified as required under C0517.
•
The menu all
– contains all codes.
– shows a list of all codes in ascending order.
•
The change between User and all and how to change parameters in the codes is described on
the following pages.
92
EDK82EV903 DE/EN/FR 2.2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Function keys

Status display

Bargraph display

Function bar 1

Function bar 2
 Parameter set
 Code number
 Subcode number
 Parameter value with unit
Changes possible when
lamp is blinking
L