Lenze Global Drive 8200 vector Instructions De Montage page 86

Relay K2
Tip!
•
If you use a function module application I/O:
– The relay is only active with application I/O as of version E82ZAFAVx21.
X1.3/K21
X1.3/K22
X1.3/K24
PES
The output message can be changed under C0409.
L
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function Relay position set
NC contact relay output
Relay middle contact
NO contact relay output
HF-shield end by PE connection through shield bracket.
Electrical installation
Relay output connections
Message
(Lenze setting)
open not assigned
closed not assigned
Technical data
AC 250 V/3 A
DC 24 V/2 A ... DC 240 V/0.22 A
85
EDK82EV903 DE/EN/FR 2.2