Explanation Of Symbols Used - Ambu aScope 4 Cysto Mode D'emploi

3. Explanation of symbols used

Symbols
39cm/15.4"
Max OD
Min ID
%
A supplementing list of symbol explanations can be found on
www.ambu.com/symbol-explanation.
4. Use of the aScope 4 Cysto
The numbers in gray circles below refer to illustrations on page 2.
4.1. Inspection and preparation of the aScope 4 Cysto
Visual inspection of the aScope 4 Cysto 1
1. Check that the pouch seal is intact before opening and discard the aScope 4 Cysto if the
pouch seal has been damaged. 1a .
Make sure to remove the protection pipe from the insertion cord 1b .
2.
3. Check that there are no impurities or damage on the aScope 4 Cysto such as rough
surfaces, sharp edges or protrusions which may harm the patient 1c .
Description
Working length of the aScope 4 Cysto insertion cord.
Maximum insertion portion width (maximum outer diameter).
Minimum working channel width (minimum inner diameter).
Field of view.
Rated power input, d.c.
Electrical Safety Type BF Applied Part.
Medical device.
Packaging level ensuring sterility.
Global trade identification number.
Country of manufacturer.
Do not use if the product sterilisation barrier or its packaging
is damaged.
Humidity limitation: relative humidity between 30 and 85 %
in operating enviroment.
Atmospheric pressure limitation: between 80 and 109 kPa in
operating enviroment.
UL Recornized Component Mark for Canada and the United States.
7