Troubleshooting List; Error With Error Code; Malfunctions - B.Braun Aesculap Mode D'emploi/Description Technique

Aesculap
LED light source OP950 with sterile adapter OP941

10. Troubleshooting list

10.1 Error with error code

Error code in display
Error Code 1
Error Code 2
Error Code 3
Error Code 4
Error Code 5

10.2 Malfunctions

Malfunction
LED light source and fan do not
work
Fan does not work
Brightness significantly lower
Light source cannot be controlled
16
®
Cause
LED light intensity cannot be adjusted or LED is defective.
Failure of housing fan
Housing temperature is more than 60 °C.
The light output is limited to 70 % light output.
The device will not switch off, but is not guaranteed to remain fully func-
tional.
The device is fitted with two internal fans for cooling the LEDs.
The first fan is defective.
The device is fitted with two internal fans for cooling the LEDs.
The second fan is defective.
Detection
Device not powered
Indicators not illuminated
Indicator light not illuminated even
after change of fuse
No air comes out of the air outlet
The optical cable cannot be
removed
Light source does not respond to
signals from the camera
Cause
Plug not inserted in the socket
Fuses blown
Malfunction in power supply unit
Malfunction in fan
Optical cable not completely
inserted
Interface cable not correctly
plugged in or defective
Remedy
Replace the LED light source as
soon as possible with a replace-
ment.
Replace the LED light source as
soon as possible with a replace-
ment.
Replace the LED light source as
soon as possible with a replace-
ment.
Replace the LED light source as
soon as possible with a replace-
ment.
Replace the LED light source as
soon as possible with a replace-
ment.
Remedy
Insert plug in socket
Replace fuses, see Fuse replace-
ment
Have LED light source repaired by
manufacturer
Have LED light source repaired by
manufacturer
Use the correct optical cable con-
nection
Check connection or replace cable