Steel Doors For External Use - Novoferm NovoPorta Premio T30-1 Instructions De Montage

Steel doors for external use

Rating Declaration
(in accordance with EU Regulation No.305 /
2011 (regulation on construction products)
laying down harmonised conditions for the
marketing of construction products and re-
pealing Council Directive 89/106/EEC)
The manufacturer:
GB
Novoferm Riexinger
Türenwerke GmbH
Industriestrasse
D-74336 Brackenheim
hereby declares that the following
steel doors:
NovoPorta Premio MZ-1,
NovoPorta Premio MZ-2,
NovoPorta Premio S-D-1 RC3 FB 4 NS and
NovoPorta Premio S-D-1 RC3 VPAM P 6 NS
have been developed, constructed and
manufactured for use as exterior doors
in conformity with EU Regulation
No.305 / 2011.
Applicable and related standards:
EN 14351-1: 2006 + A2: 2016 windows and
doors – product standard, performance
characteristics – windows and exterior
doors without any fire protection smoke-
proof properties.
The first operation of the door is prohibited
until it has been established that the door
has been installed following the manufac-
turer's instructions and its functionality has
been checked. In case of any change to the
product not agreed with the manufacturer,
this declaration shall lose any force.
If the said products are not used as an ex-
terior door, this circumstance will remove
the applicability of the terms of the regula-
tions on construction products.
Note: Declarations of performance will
be available only for doors with the CE
mark. The declaration of performance
matching your product can be identified
as the number shown on the CE mark
(* see sample on the right).
Note: You can find approvals for T30 / T90
fire protection doors and smoke-proof,
sound-proof and security doors on the
Internet at www.novoferm.com
22
Exernal use
Doors for external use are checked on
the basis of the test criteria set out in EN
14351-1 and are delivered with the CE mark
and a declaration of performance from
01/07/2013 on.
You will find a list of your Novoferm door's
properties on a separate label attached to
it. Please peel off the label and stick it onto
the documentation or into these installation
instructions.
Note: Please add the door number
and location of installation on the lower
section of the label.
You can find detailed information on the
product from the documentation delivered
with the product.
These instruction forms a part of the multi-
purpose doors for external usage and fire
protection barriers, in addition to the gen-
eral building regulatory approvals listed
below.
Please keep these assembly, operating and maintenance instructions as long as you use the product!
*
Rating label
(100 x 150 mm)