IT Works REPW300 Mode D'emploi page 8

The following table describes indicator status of the device.
Indicator Color
Green
Power
Red
WPS Green
Ethernet Green
WLAN Green
Status Description
On The device is working normally.
The system is in the process of
On self‐inspection or fails the self‐inspection. Or
it is in the process of software upgrade.
Off The WPS session is down.
The WPS indicator keeps on for 5 minutes
On
after WPS (Wi‐Fi Protected Setup)
connection succeeds.
A terminal is attempting to connect to the
Quick blink
device through WPS but fails.
Quick blink Multiple terminals are connecting to the
with a certain device through WPS at the same time. WPS
interval sessions conflict.
Slow blink The WPS session is up.
The Ethernet port is in the
Off
non‐communication state.
The Ethernet port is in the communication
On
state.
The Ethernet port is transmitting and
Blink
receiving data.
The WLAN connection is in the
Off
non‐communication state.
The WLAN connection is in the
On
communication state.
Data is being transmitted and received in the
Blink
WLAN.
7