Configure The Device - IT Works REPW300 Mode D'emploi

Configure the Device
6
The following table describes the IP information of AP/Repeater/Client modes of the
device.
Mode On Mode Available
the Case In the Web
Bridge (default)
AP
Router
Repeater Wireless
Universal
Repeater
(default)
WDS
Client Client (default)
Step 1 Set the three‐way switch on the case of the device to the mode you want.
Step 2 Run the Internet Explorer (IE). Enter the management IP address of
192.168.100.253 and press Enter. In the login window displayed below, enter
the user name and password (both are admin).
Step 3 Click Login, the following page is displayed.
Management IP Subnet MAC
Address Address
192.168.100.253 255.255.255.0
192.168.100.253 255.255.255.0
192.168.100.253
255.255.255.0
13
Way of
DHCP
connecting to PC
Disable Ethernet cable
/Wireless
Enable Wireless only
Disable Ethernet cable
/Wireless
Disable Ethernet cable
only