Block Services - IT Works REPW300 Mode D'emploi

Step 1 Select Per Schedule or Always to enable keyword blocking.
To block by schedule, be sure to specify a time period in the Schedule page. For more
information about scheduling, refer to section 8.8.3 Schedules.
Step 2 Enter keywords or domain names that you want to block in the keyword field
and click Add Keyword. The keyword or domain name then appears in the
Block Sites Containing these Keywords or Domain Names list.
Keyword application examples:
If the keyword XXX is specified, the URL www.aabbcc.com/xxx.html is
–
blocked.
If the keyword .com is specified, only websites with other domain suffixes
–
(such as .edu, .org, or .gov) can be accessed.
Step 3 You can specify one trusted user, which is a computer that has no restriction in
network access. To specify a trusted user, enter the computer's IP address in
the Trusted IP Address field and select the Allow Trusted IP Address to Visit
Blocked Sites check box.
Since the trusted user is identified by IP address, you should configure that computer with
a fixed IP address.
Step 4 Click Apply to save the settings.
8.7.2 Block Services
The repeater allows users to block the use of certain Internet services by computers on
your network.
Choose Security Options > Block Services and the Block Services page is displayed.
Follow the procedures below to specify a service for blocking.
Step 1 Select Per Schedule or Always to enable keyword blocking.
60