Wireless Basic Settings; Management Function; Web Configuration In Client Mode; Running Status - IT Works REPW300 Mode D'emploi

10.5.2 Wireless Basic Settings
For details, refer to 7.5.1 Wireless Basic Settings.
10.6 Management Function
For details, refer to section 7.6 Management Function.
11 Web Configuration in Client Mode
Note:
Set the three-way switch on the side panel to Client Mode.
11.1 Running Status
Set the three‐way switch on the case of the device to Client mode. Click Running Status to
display the extended navigation menu.
11.1.1 Router Status
Choose Running Status > Router Status and the Router Status page is displayed.
76