Wireless Advanced Settings - IT Works REPW300 Mode D'emploi

Enable SSID Broadcast: If enabled, the device broadcasts its SSID to all wireless
stations.
Allow Guest to access My Local Network: If enabled, visitors using the SSID of a
guest network can access not only the Internet but also LAN of the device, like
users using the primary SSID of the network. If disabled, visitors using the SSID of a
guest network cannot access LAN of the device.
Enable Wireless Isolation: If selected, wireless clients connected to the guest
network of the same SSID can access the Internet only, but cannot communicate
with each other.
Guest Wireless Network Name (SSID): Set the name of the guest network.
Security Options: Refer to security option descriptions in section 8.5.2 Wireless
Basic Settings.
After finishing, click Apply to save the settings.
7.5.3 Wireless Advanced Settings
Choose Wireless Settings > Wireless Advanced Settings and the Wireless Advanced
Settings page is displayed.
Enable Wireless Router Radio: If you disable the wireless router radio, wireless
devices cannot connect to the repeater. If you do not use your wireless network
29