Clients List; Setup Wizard; Mode Setting; Network Settings - IT Works REPW300 Mode D'emploi

In this page, you can view information about the current running status of the device,
including system information, LAN port status, and wireless network status.
7.1.2 Clients List
Choose Running Status > Clients List and the Clients List page is displayed.
This page displays information of computers connected to the router, including the IP
adress, and MAC address of each computer.
7.2 Setup Wizard
For settings, refer to section 6.1 Bridge Mode Configuration.
7.3 Mode Setting
Click Mode Settings and the Mode Settings page is displayed.
Bridge Mode: The interface on its case is an LAN interface. Users can connect the
device and PC by an RJ45 cable or a wireless network card.
Router Mode: Computers can connect to the device in wireless way only.
7.4 Network Settings
Click LAN Interface Settings to display the extended navigation menu.
22