7.5.1 Wireless Basic Settings
Choose Wireless Settings > Wireless Basic Settings and the Wireless Basic Settings page
is displayed.
Region: Select the region where you are located.
Enable SSID Broadcast: If enabled, the router broadcasts its SSID in the wireless
network. Wireless clients can scan the SSID and access the wireless network under
the SSID.
Enable Wireless Isolation: If selected, wireless clients connected to the network of
the same SSID can access the Internet only, but cannot communicate with each
other.
Name (SSID): Set the name for the wireless network. The SSID can contain up to 32
characters and can be letters, numerals, underlines, and any combinations of them.
The SSID is case‐sensitive.
Mode: Select the wireless mode. Mixed 802.11b/g/n is recommended.
25