IT Works REPW300 Mode D'emploi page 43

Account Name: The account name is provided by your ISP. If the ISP does not
provide it, you can leave the item blank.
IP Address: Enter the WAN IP address provided by the ISP. The parameter must be
entered.
IP Subnet Mask: Enter the WAN subnet mask provided by the ISP. It varies with the
network type. It is usually 255.255.255.0 (Class C).
Gateway IP Address: Enter the IP address of the gateway provided by the ISP. It is
the IP address used for connecting to the ISP.
Primary DNS: Enter the IP address of the primary DNS server if necessary.
Secondary DNS: Enter the IP address of that DNS server if the ISP provides another
DNS server.
MTU Size: Set the maximum transmission unit. The default value is recommended.
Router MAC Address: See descriptions on setting Router MAC Address for DHCP.
After finishing, click Apply to save the settings.
(3) PPPoE
If the ISP provides the user name and password for PPPoE (Point‐to‐Point Protocol over
Ethernet) dialup, click Yes and select PPPoE.
42