8.4.2 WAN Interface Settings
Choose Network Settings > WAN Interface Settings and the WAN Interface Settings page
is displayed.
The router supports 5 modes of WAN connection, including Dynamic IP (DHCP), Static IP,
PPPoE, PPTP, and L2TP. Select the WAN connection you use. Contact your ISP if you do
not know your WAN connection mode.
(1)
Dynamic IP (DHCP)
If dynamic IP (DHCP) is selected, the device automatically obtains the IP address from the
ISP automatically. Select DHCP when the ISP does not provide any IP network parameters.
See figure below:
Account Name: The account name is provided by your ISP. If the ISP does not
provide it, you can leave the item blank.
Domain Name Service (DNS) Address: Select Use These DNS Servers if you know
that your ISP does not automatically transmit DNS addresses to the router during
40