Wds Mode; Repeater Configuration In The Wds Mode - IT Works REPW300 Mode D'emploi

Step 3 Click Site Survey to search for the wireless network you want to connect. Select
a desired network. Click Next.
Step 4 Configure the repeater with the same security option as its uplink network.
(The following figure takes the security option of None as an example.) Set the
encryption password and note it down. Click Next.
Step 5 The device provides wireless roaming function if Synchronize Wireless
Universal Repeater's and Uplink AP's SSID and Security Options is selected.
Otherwise, manually configure the SSID and security options for the repeater.
Click Finish to complete setup wizard.
6.4 WDS Mode
6.4.1 Repeater Configuration in the WDS Mode
Step 1 Set the three‐way switch on the side panel to Repeater after the device is
powered on. Log in to the configuration page after the system is started.
17