Wireless Universal Repeater; Wps Setup - IT Works REPW300 Mode D'emploi

9.5.1 Wireless Universal Repeater
In universal repeater mode, the device acts as the AP and client simultaneously.
Choose Wireless Settings > Wireless Universal Repeater and the Wireless Universal
Repeater page is displayed.
SSID of Extended Interface: Set the SSID of the repeater.
Security Options: Set the security encryption mode for the repeater. It is
recommended to configure the repeater with the same encryption mode as that of
its uplink AP.
After finishing settings, click Apply to save the settings.
9.5.2 WPS Setup
Choose Wireless Settings > WPS Setup to display the page below.
WPS refers to Wi‐Fi Protected Setup.
You can use WPS to establish wireless connection in a quick and secure way if the uplink
AP or terminal (for example, the network adapter) has the WPS function. It is suggested
to first configure wireless encryption for the uplink AP. If you change the wireless
encryption mode after having established wireless connection by WPS, you must use WPS
to establish wireless connection again. Note that if the wireless client does not support
69