Wireless Settings - IT Works REPW300 Mode D'emploi

Starting IP Address/Ending IP Address: Set the starting and ending IP addresses to
specify a pool of IP addresses to be assigned by the DHCP server. After you set
Starting IP Address/Ending IP Address, hosts in the LAN obtain IP addresses that
are in the range of the starting and ending IP addresses.
DHCP Lease Time: The valid time for an IP address that is automatically assigned by
the DHCP server to a host. The DHCP server does not assign the IP address to other
hosts within the specified time.
7.4.2.2 Using Address Reservation
When you specify a reserved IP address for a computer in the LAN, the computer always
receives the same IP address each time it accesses the router's DHCP server. Reserved IP
addresses should be assigned to computers or servers that require permanent IP settings.
To reserve an IP address:
Step 1 Click Add to enter the Address Reservation page.
Step 2 Select one item from Address Reservation Table, or enter the IP address in the
IP Address field to assign to the computer or server (Choose an IP address
from the IP address pool that you have specified, for example 192.168.100.x).
Enter the MAC address and device name of the computer or server.
Step 3 Click Add to add a new item into Address Reservation.
Step 4 Click Apply to save the settings.
7.5 Wireless Settings
Set the three‐way switch on the side panel to AP. Click Wireless Settings to display the
extended navigation menu.
24