IT Works REPW300 Mode D'emploi page 42

login. And enter the IP address of your ISP's primary DNS server. Enter a secondary
DNS server address if available.
MTU Size: Set the maximum transmission unit. The default value is recommended.
Router MAC Address: Physical address of the router.
Generally, select Use Default Address.
–
If the ISP requires MAC address authentication, Select Use Computer MAC
–
Address or Use This MAC Address. If you select Use Computer MAC Address,
the MAC address of the current computer serves as the MAC address of the
router. If you select Use This MAC Address, you need to enter the MAC
address of another computer. The format of an MAC address is
XX:XX:XX:XX:XX:XX.
After finishing settings, click Apply to save the settings.
(2) Static IP
If the ISP provides the IP address, subnet mask and information about the gateway and
DNS server, select Static IP. Contact your ISP if you do not know the information.
41