You can perform WPS settings by the Web page for configuration.
Choose Wireless Settings > WPS Setup to display the WPS page.
PBC mode
Step 1
Select Push Button and click Start PBC. WPS encrypted connection starts.
Step 2
Press the WPS button on the network adapter or click the PBC button in the
network adapter configuration tool within 2 minutes to start WPS connection.
After WPS connection is established, the following page is displayed, indicating
the WPS connection is completed.
PIN mode
Step 1
Select PIN, enter the PIN code of the network adapter (refer to the client of the
network adapter), and click Start PIN to start WPS connection.
Step 2
Click the PIN button on the network adapter within 2 minutes to start WPS
connection. After WPS connection is established, the following page is
displayed, indicating that the WPS connection is completed.
71