Nat Alg; Wireless Settings - IT Works REPW300 Mode D'emploi

Step 2 Select one item from Address Reservation Table, or enter the IP address in the
IP Address field to assign to the computer or server (Choose an IP address
from the IP address pool that you have specified, for example 192.168.100.x).
Enter the MAC address and device name of the computer or server.
Step 3 Click Add to add a new item into Address Reservation.
Step 4 Click Apply to save the settings.
8.4.4 NAT ALG
Choose Network Settings > NAT ALG and the NAT ALG page is displayed.
Disable SIP ALG: Certain SIP applications have special mechanisms for passing
through the NAT firewall and SIP ALG may have conflicts with these mechanisms.
In most cases, please disable SIP ALG.
Disable IPSEC/L2TP/PPTP Pass‐Through: IPSEC/PPTP/L2TP Pass‐Through provides
a secure communication method for remote computers in the wide area network
(WAN) (for example, the Internet). Enable the corresponding VPN pass‐through
function if an intra‐network host needs to use a VPN protocol (such as the PPTP,
L2TP, IPSEC) to connect to a remote VPN network through the router.
After finishing settings, click Apply to save the settings.
8.5 Wireless Settings
Click Wireless Settings to display the extended navigation menu.
49