Guest Network - IT Works REPW300 Mode D'emploi

PassPhrase: Enter 8‐63 ASCII characters or 64 hexadecimal digits.
Note:
After complete configuring wireless settings for the device, only hosts that have the
same wireless settings (for example, the SSID) as the device can connect to it. If you
configure security settings for the device, hosts must have the same security settings
(for example, the password) as the device in order to connect to it.
7.5.2 Guest Network
If you do not want visitors to know your wireless security key, you can use the guest
network to allow them to use your Internet without knowing your wireless connection
password.
Choose Wireless Settings > Guest Network and the Guest Network page is displayed.
Network Profiles: Brief description of the created guest network. You can create
up to four guest networks. A network profile contains the SSID and encryption
mode, whether to use the guest network, and whether to broadcast SSID. You can
click the radio button of a profile to view detailed information or modify settings.
Enable Guest Network: If enabled, both you and visitors can connect to the
network by using the SSID of the guest network.
28