Step 2
Press the WPS button on the network adapter or click the PBC button in the
network adapter configuration tool within 2 minutes to start WPS connection.
After WPS connection is established, the following page is displayed, indicating
that the WPS connection is completed.
PIN mode
Step 1
Select PIN, enter the PIN code of the network adapter (refer to the client of the
network adapter), and click Start PIN to start WPS connection.
Step 2
Click the PIN button on the network adapter within 2 minutes to start WPS
connection. After WPS connection is established, the following page is
displayed, indicating that the WPS connection is completed.
7.6 Management Function
Click Management Function to display the extended navigation menu.
33