Dhcp Server - IT Works REPW300 Mode D'emploi

For details of parameter settings for this page, refer to previous parameter descriptions
for PPTP.
8.4.3 DHCP Server
Choose Network Settings > DHCP Server and the DHCP Server page is displayed.
DHCP refers to Dynamic Host Configuration Protocol. If Use Device as DHCP Service is
selected, the device will automatically assign IP addresses to comupters in the LAN. Users
do not need to configure TCP/IP protocol paramters such as the IP address, the subnet
mask, the gateway, and the DNS server information for computers connected to the
router's LAN.
47