Recommended Fire-Extinguishing Equipment; Glossary - SICE A98 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

At the end of life your product contact your distributor to have information on the collection
arrangements.
When buying this new product your distributor will also inform you of the possibility to return free
of charge another end of life equipment as long as it is of equivalent type and has fulfilled the
same functions as the supplied equipment.
A disposal of the product different from what described above will be liable to the penalties
prescribed by the national provisions in the country where the product is disposed of.
We also recommend you to adopt more measures for environment protection: recycling of the
internal and external packaging of the product and disposing properly used batteries (if
contained in the product).
With your help it is possible to reduce the amount of natural resources used to produce
electrical and electronic equipments, to minimise the use of landfills for the disposal of the
products and to improve the quality of life by preventing that potentially hazardous substances
are released in the environment.

RECOMMENDED FIRE-EXTINGUISHING EQUIPMENT

When choosing the most suitable fire extinguisher consult the following table:
Dry combustibles
Water
Foam
Dry chemical
2
CO
YES* = Use only if more appropriate extinguishers are not on hand and when the fire is small.
The indications in this table are of a general nature. They are designed as a guideline for
the user.
The applications of each type of extinguisher will be illustrated fully by the respective
manufacturers on request.
Find below a brief description of some of the technical terms used in this manual.
Characteristic Angles
This term refers to all the angles that can be normally measured on a wheel aligner (total
front/rear toe, left/right and front/rear half toe values, left/right and front/rear camber, left/right
caster, left/right king pin angle, and steering angle difference at 20°).
Clamp
Adapter from wheel and measurement sensor.
Equatorial plane
Hypothetical vertical plane that divides the wheels into two equal parts.
Turntable
This is a base mounting a disk on which the steer wheels of the vehicle are positioned.
Turntables reduce friction between the tyre and the ground to facilitate settling in of the
suspensions and to cancel measurement errors during steering turns.
Flammable liquids
YES
YES
YES*
YES*
NO
YES
YES
YES*
WARNING

GLOSSARY

43
Electrical fires
NO
NO
YES
YES*

Publicité

Table des Matières
loading

Table des Matières