Rear Axle Measurement And Adjustment Window - SICE A98 Manuel D'instructions

REAR AXLE MEASUREMENT AND ADJUSTMENT WINDOW

Displays the measured angles for the vehicle rear axle and the adjustment reference tolerances
(fig. 13).
The values are continually updated to guide the operator performing the adjustment.
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 goes back to the previous window
- F3 (or Enter): advances to the next window
- F4 sets:
 Unit of measurement
Toe angle

• Degrees;
• Length;
Setback and Track Difference

• Degrees
• Length
Length

• Millimetres
• Inches
Angles

• Centesimal degrees
• Sexagesimal degrees
Pressure

• Bar
• Psi
Weight

• Kilograms
• Pounds
Mileage/Kilometres on the clock

• Kilometres
• Miles
 Alignment procedure
Adjustment with car lifted

• On;
• Off;
- F5 enables/disables execution of the "Jack & Hold" procedure
- F6 switches between display of the camber, Track Difference and Setback adjustment boxes
- F7 displays the animation window
- F8 displays a window with a list of working windows. Used for skipping quickly between
windows.
- F10 returns to the starting screen.
Notes
• The numeric values are colour-coded as follows:
- Red background: value outside the permitted tolerance range;
- Green Background: value within the permitted tolerance range;
- Blue background: value with no associated reference tolerance range;
• Animated icons that respond to the progress in the adjustment procedure appear beside the
adjustment value display fields.
34