File Data Modification Window; File Data Input Window - SICE A98 Manuel D'instructions

- F10 goes back to the job record input window.
Notes
• Press F8 to enter a new vehicle; the program checks if the operator is stored in the file when
the relevant data are entered. If the data are present, the program signals it and asks if they
have to be displayed. If you answer yes, the window is automatically filled in. If you answer no,
the window appears completely empty.
In addition to his first and last name, the operator must also enter the operating mode, which
refers to the tilting settings set using the Service programme.
From the menu in figure 30, the operator can be set as predefined and the numerical keypad
can be enabled for quick tilting positioning.
Once the numerical keypad has been enabled, pressing keys 1,2,3,4,5 accesses the following
tilting levels:
1: Predefined position for the ROC
2: Predefined position for the steering lock
3: Predefined position for adjustment
4: 1st Auxiliary position
5: 2nd Auxiliary position
The modification screens refer to:
- Vehicle makes in databank (makes entered by the operator)
- Vehicle models in databank (models entered by the operator)
- Customers on file
- Vehicles on file
- Operators on file
To make a modification, proceed as follows:
- select the field to be modified using the "Tab" or "Shift" + "Tab" keys (if the window contains
more than one field)
- enter a new character/value over the letters or numbers of the selected item
- re-enter the correct value.
To confirm the changes made and exit this window, proceed as follows:
- press the F3 key; you will be prompted to confirm saving of the modified data.
- press F3 to confirm.
If you do not wish to confirm saving, press F2.
The data input windows refer to:
- Vehicle makes in databank;
- Models of vehicle in databank;
- Customers on file;
- Vehicles on file;
- Operators on file.
To enter the data, proceed as follows:
- select the field to be entered using the "Tab" or "Shift" + "Tab" keys (if the window contains
more than one field)
- type a character/value

FILE DATA MODIFICATION WINDOW

FILE DATA INPUT WINDOW

27