Tilt Level Selection; Job Record Window - SICE A98 Manuel D'instructions

In all the working windows, press the F4 key to display/set up all the options relating to the
current working window.
Pressing ALT-O you access the page shown in Fig. 30, in which the current operator can be
selected by double clicking on the name.
Some icons are located at the bottom of the screen that are used to set the camera tilting to the
preset levels:
Tilting reset and positioning to the factory predefined position.
Tilting positioning in the predefined position for ROC.
Tilting positioning in the predefined position for the steering lock.
Tilting positioning in the predefined position for the adjustment.
Tilting positioning in the 1st auxiliary position.
Tilting positioning in the 2nd auxiliary position.
Click on the F2 icon to return to the initial page.
If vehicle selection by means of job record has been set in the machine set-up as alignment
operating procedure, the job record input window is displayed automatically.
This window allows entering vehicle data, customer data and the vehicle make/model selection
following the procedures described in the "General Considerations" section.
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 returns to the previous window
- F3 (or "Enter"): advances to the next window
- F4 sets:
 Units of measurement:
Pressure

• Bar
• Psi.

Tilt level selection

JOB RECORD WINDOW

24