General Safety Information - DT SWISS F 232 ONE Manuel D'utilisation

Congratulations on the purchase of your new DT Swiss fork! You have purchased a quality product
made by DT Swiss.
1. GENERAL
This user manual is intended for the user of the fork. It includes information on the assembly, setup,
maintenance and care of the fork.
For further information and activities refer to www.dtswiss.com.
Users must read and understand this manual before using the component. Third-party users must
also be informed about the following provisions. Keep this user manual handy / for reference in case
you need to refer to it later.
2. SAFETY

2.1 GENERAL SAFETY INFORMATION

DANGER
Incorrect handling, installation, maintenance or servicing can lead to accidents causing severe
injuries or death!
• Compliance with the following provisions is a prerequisite for accident-free use and faultless
performance.
• Assembly and maintenance of the fork requires a basic knowledge of handling bicycle
components. If in any doubt, consult your retailer.
• The fork should only be used in accordance with its intended use. Otherwise the user shall
assume responsibility.
• The fork must be compatible with all parts of the bicycle.
• Before riding for the first time, the fork must be checked for ease of action.
→ The fork crown must not touch the down tube when the handlebar is fully turned!
→ The remote cable must not be clamped between fork crown and frame when the handlebar
is fully turned!
→ The fender must not touch the down tube when the fork is fully compressed!
→ The tire must not touch the fender or fork when the fork is fully compressed!
• None of the add-on parts must have any sharp edges.
• Only use original DT Swiss accessories and spare parts.
• The fork must not be changed or modified. No threads may be cut into the steerer tube.
• The fork must not be used if it is damaged or there are any signs of damage. If in any doubt,
consult your retailer.
2.2 COMPATIBILITY
Do not use the fork on bicycles with bicycle trailers.
Do not use front wheels with a hub motor.
F 232 ONE - User Manual V2021.09
17