Ecolab Versatronic Manuel D'utilisation page 507

Setting the email server
For sending messages, you must specify the data for the outgoing mail server.
Go to the server settings and enter the data here. For the server setting data, contact your
email service provider or network administrator.
Go to the server settings:
Setup only è E-Mail (double-click) è "E-Mail-Server" button
Fig. 137: Setting the email server
12.8.12 Web server
As an alternative to online visualisation, you can activate the web server with a
customised website. If the Web server is activated, its website automatically replaces the
online visualisation. See
Creating sites requires sufficient knowledge of website programming and
the specifications of the Web server in Ecolab 'Versatronic' .
Can import customised sites into the Web server configuration.
To edit a previously stored site it can be exported.
In the Web document you can also show data from the device memory of 'Versatronic' .
Go to settings: Just Setup è Web configuration (double-click)
Ä 9.6 'Online visualisation' on page 104.
235
PC setup program
417102269 Rev. 2-08.2020