Ecolab Versatronic Manuel D'utilisation page 459

11.2.1 Monitor the internal temperature
You can see the temperature inside in the Device Info menu. You will need appropriate
user rights. By default, Master and Service users can view this information.
View the board temperature display:
Device menu è Service è Service data è "Internal data" tab
NOTICE!
If overheating occurs in the machine, the "internal temperature too high"
alarm is triggered.
The signal from this alarm is available in the binary selector and can be
output from the device for the purpose of signalling to external signalling
devices or control stations.
The selection of the alarm "internal temperature too high" when configuring binary outputs
and internal functions:
Binary selector è Alarms and internal signals è Internal temperature high
11.2.2 Performing an energy balance test
Fig. 93: User login
Fig. 94: Device version
1 Call-up by double-click
Retrofitting option boards
187 417102269 Rev. 2-08.2020