Ecolab Versatronic Manuel D'utilisation page 358

Use
9.1.4.2 Display elements Versatronic cooling water
Fig. 33: Versatronic cooling water: Overview image and single image
A Overview screen
B Frame
1 Name of display image
2 Name of measuring channel
3 Reading
4 Switch point desalination ON
5 Switching point pre-desalination on
6 Switch point desalination OFF
7 Temperature of cool water
8 Current status of cool water treatment
9 Hold group display (one or more measurement
channels are not approved)
For a description of how Versatronic cooling water works,
Ä Chapter 4.1.1 'Special version Versatronic – Cooling Water' on page 27.
see
9.1.5 Invalid display values
Fig. 34: Example display invalid values:
Invalid input signal / readings or error in the configuration of the analogue inputs are
detected and visualised in the reading displays as follows:
Type of error
Below display range
Above display range
417102269 Rev. 2-08.2020
10 Calibration timer expired (perform calibration!)
11 Not approved (control output disabled)
12 Biocide dosing flag
13 Circulation flag
14 Nominal value controller additional measurement
15 Additional temperature measurement
16 Switching state output additional measurement (output
active)
17 Date
18 Login level
19 Time
20 Memory in % remaining for registration
86
Display
<<<<<
>>>>>