Ecolab Versatronic Manuel D'utilisation page 411

Configuration
point Selection / option
Ch. X Al1 limit -99999 to 99999
Ch. X Al2 Alarm Type *Inactive
* Min. alarm
* Max. alarm
Alarm window
inverted Alarm window
* = Please select only the highlighted points
Ch. X Al2 Threshold -99999 to 99999
Ch. X Cal.timer y / n Inactive active
Ch. X Calib. interv. 0-9999 days
Contr. X controller * OFF
type * Two-point controller
* Three-point controller
* General / fine controllers
Three-point step controller
Cont. Controller with positioner
* Continuous controller
* = Please select only the highlighted points
Contr. X expected Direct
effect (Controller switches on when
target value is exceeded)
Inverse
(Controller switches falls below
the setpoint a)
Contr. X monitoring y / Inactive active
n
Contr. X monitoring 0-9999 s
time
Contr. Allow X y / n Inactive active
Contr. X extra enabled Binary inputs /
inputs *IN1 input 1
*IN2 input 2
* IN3 binary 3
* IN13 digital input 4
IN14 digital input 5
IN15 digital input 6
* = Please select only the highlighted points
Explanation
Set Alarm 1
threshold
Enable Alarm 2
Set the alarm type
Alarm 2 limit value setting 0,0000
Enable calibration timer
Set the calibration interval
The calibration interval is
the time after which a
calibration reminder is
displayed.
After performing a
calibration, the calibration
reminder disappears.
Choose the controller type Two-point controller
Choose the control
direction
Activation of the
dispensing monitoring
Set the monitoring time
If the target value is not
reached after this time, an
alert is displayed.
Activate external
activation
(After activation the
controller is only enabled if
there is a closed contact
at the associated input)
Assigning channels -
inputs
Channel 1: IN1
Channel 2: IN2
Channel 3: IN3
Channel 4: IN13 (pin 1+4)
Set an additional enable
input
The selected input is
AND-linked to the input,
which is assigned by
default to the respective
channel.
Example: At channel 1 IN2
is selected here:
Controller 1 is enabled
only when a closed
contact abuts IN1 and IN2.
139
Device menu
Default
0,0000
Inactive
Inactive
10 days
Direct
Inactive
600 s
Inactive
Channel 1: IN 1
Channel 2: IN 2
Channel 3: IN 3
Channel 4: IN 13
417102269 Rev. 2-08.2020