Ecolab Versatronic Manuel D'utilisation page 500

PC setup program
2. Import:
Highlight a picture in the list that you wish to overwrite with the new one, and click on
the "Replace" button.
Export:
Highlight a picture in the list that you wish to export and click on the "Export" button.
3. Import:
In the Explorer window select the new image file and click "Open".
Export:
Select the desired location for the exported image in the Explorer window, enter a file
name and click "Save".
4. The import/export was completed. You can close all the windows that were opened
in step 1 with "OK" or "Cancel".
Tip:
It is advisable to create an image that contains all the static elements of your systems
display and to use this as a background. In the next step, all the dynamic visualisation
elements in the form of objects (e.g. pictograms for valves and pumps, or analogue
displays) are placed at the locations provided in the process picture.
Example:
A process picture for a CIP analgesia should be established. In the first step, the display
of all static elements (pipes, containers, etc.) is made as a bitmap. The bitmap is imported
into the image list and selected as a background. In the next section (section "Objects",
page 285) are added to the sample process picture objects.
Fig. 133: Process picture
Objects
In the object list of process picture editor 50 empty properties are available. By double-
clicking on an entry or clicking the "Edit" button in the process picture editor, a dialogue
opens for the detailed configuration, design and formatting of the corresponding object.
To overview the list for each object the size, position in the process picture, type, and
visibility can be displayed.
The item number in the object list is also the display priority of an object. Objects with
higher position numbers cover other lower position numbers.
Use the buttons in the process picture editor object list entries can be copied, cut, paste,
moved and deleted. SeeFig. 129, Item 3.
417102269 Rev. 2-08.2020 228