Ecolab Versatronic Manuel D'utilisation page 412

Device menu
Configuration
point
Ch. X man. temp.
comp. y / n
(only pH or Cl/Cd/PA)
Ch. X source temp.
Ch. X Source Temp.
417102269 Rev. 2-08.2020
Selection / option
yes
no
Analogue inputs /
* IN4 temperature input 1
* IN5 temperature input 2
......IN11 Universal input. 2
uncomp.
* IN11 Universal input. 2 comp.
IN12 Universal input 3 uncomp.
* IN12 Universal input. 3 comp.
* = Please select only the highlighted points
2-wires
3-wires
140
Explanation
The type of temperature
compensation is selected
here.
yes = compensation to a
fixed temperature value
no = automatic
compensation,
temperature value comes
from the temperature input
allocated to the respective
measuring channel (for
Ä Chapter
allocations see
4.5 ' Allocation of inputs
and outputs to the
measurement channels'
on page 32).
Determining the source for
the temperature display
and for the temperature
compensation of the
respective channel.
Select this option to use
the temperature signal of
another channel for the
display and temperature
compensation of this
channel.
Selecting the temperature
sensor connection type
Default
yes
Channel 1: IN4
Channel 2: IN5Channel
3: IN11 comp.
Channel 4: IN12 comp.
3-wires