Adding Or Removing A Module - Dräger REGARD 3000 Mode D'emploi

|
en
REGARD configuration software
2. If necessary, enter Name: and Description: in the information area.
3. Select
 A dialogue window is displayed.
4. In the Add Docking Station dialogue window, select the Docking Station and
confirm with
✓ The Docking Station is displayed in the system overview.
11.4.3.2 Removing a Docking Station
1. In the System view area, select the Docking Station.
2. Select
 A dialogue window is displayed.
3. Confirm the removal with
✓ The Docking Station is removed from the system overview.
11.4.3.3 Moving the Docking Station
1. In the System view area, select the Docking Station.
2. The CTRL + ↑ or ↓ arrow key can be used to move the Docking Station
accordingly.
11.4.4

Adding or removing a module

11.4.4.1 Adding a module
1. In the System view area, double-click on the relevant Docking Station to select
it.
 The module slots are displayed.
2. Select the slot to be added to a module.
3. Select
 A dialogue window is displayed.
4. In the Add module dialogue window, select the module type and the firmware
version, and assign a module tag if necessary.
5. Confirm the information with
✓ The module is displayed in the system overview.
11.4.4.2 Removing a module
1. In the System view area, double-click on the relevant Docking Station to select
it.
 The module slots are displayed.
2. Select the slot to be removed.
3. Select
 A dialogue window is displayed.
4. Confirm the dialogue with
✓ The module has been removed from the system overview.
176
.
.
.
.
.
.
.
.
|
Instructions for use
REGARD 3000