View Role; During Operation; Operation Role; Maintenance Role - Dräger REGARD 3000 Mode D'emploi

|
en
User roles
– Create, change and delete users.
– Update the Display Unit firmware.
8.2

View role

After logging into the system the default view will be displayed (configurable). For
further information, see the following chapter: "Display Unit settings", page 162.
8.2.1

During operation

To change your own password:
1. Select
2. Enter the new password in the Password: input field.
3. Repeat the password in the Verify password: field and confirm it.
✓ The password is changed.
8.3

Operation role

After logging into the system the default view will be displayed (configurable). For
further information, see the following chapter: "Display Unit settings", page 162.
8.3.1 During operation
In addition to the functions of the View only user role, alarms and other special
signals can also be acknowledged.
To acknowledge an alarm or special signal:
1. Select
To acknowledge all alarms or special signals in the system:
1. Select
To display detailed information and messages about a channel:
1. Select Channel > Status.
 The channel status information is displayed.
2. Select Channel status.
3. In the Reason list area, select the desired message.
 The cause of the message is displayed.
8.4

Maintenance role

8.4.1

Maintaining the Docking Station

All Docking Stations present in the system are displayed in the system component
view.
Proceed as follows to identify the Docking Station that is to be maintained:
1. Select the
2. Select the
 The LEDs of all modules installed in the Docking Station flash for approx.
142
> Edit user.
in the alarm row.
.
button in the channel list view.
button in the Docking Station row.
10 s.
|
Instructions for use
REGARD 3000