Buttons Of The Display Selection Bar; Displays Of Progress Bar; Generally Used Icons - Dräger REGARD 3000 Mode D'emploi

If the "Acknowledge all channels" function is selected, channels that are not
displayed may also be acknowledged.
6.9

Buttons of the display selection bar

Symbol
6.10

Displays of progress bar

The progress bar shows the most important system information. The field in
question displays whether the status "Alarm", "Fault", "Warning", "Inhibit", or
"Information" is active and on how many channels. If one of these states is active,
press the applicable button to reduce the channel display to the relevant channels.
Number and
selection of
input channels
in alarm state
6.11

Generally used icons

Symbol
|
Instructions for use
REGARD 3000
Feature
View system
components
Selection of input
channels
Selection of out-
put channels
Group view
0 2
Number and
selection of
channels with
a fault
Description
The channel is in the Inhibit state. This is used, for example, during a
calibration to suppress activation of an alarm element in spite of a
pending alarm condition.
The channel remains in the Inhibit state for 321 seconds.
Information is available on the channel.
A warning is on the channel.
A fault is on the channel.
Description
Display overview of all Docking Stations in the
system (only available for the Maintenance, Con-
figuration and Administration user roles).
Display input channels.
Display output channels.
Display defined groups of channels.
0 2
Number and Number and
selection of selection of
channels with channels in
a warning inactive state
|
en
Control
0
Number and
selection of chan-
nels with informa-
tion
129