View Only User Role; Operation User Role; Maintenance User Role; Configuration User Role - Dräger REGARD 3000 Mode D'emploi

After 15 minutes of inactivity the user is logged out or the screen is locked. The user
must log in again. If an input from the user is expected during the locked period
(e.g. during configuration), the user is prompted to enter the user password again. If
automatic login is configured for the Display Unit (For further information, see the
following chapter: "Set automatic login", page 163), the configured user is
automatically signed in.
If the system is interlinked, the scope of the displayed channels and the
configuration options between the REGARD 3000 Display Unit and the REGARD
Configuration Software may differ. For further information see: "Interlinking with
REGARD 7000", page 180.
Dräger recommends assigning the Configuration, Maintenance and
Administration user roles only to appropriately trained personnel.
8.1.1

View only user role

The following functions are available:
– Measured value displays
– Status displays
– Change your password
8.1.2

Operation user role

The following functions are available in addition to the View only user role:
– View detailed information on individual channels.
– Acknowledge of alarms and special signals.
8.1.3

Maintenance user role

The following functions are available in addition to the Operation user role:
– Display information on system components.
– Display channel configuration.
– Prepare the system for adjustment of the connected transmitters (such as
setting channels to the Inhibit state).
– Test system components.
8.1.4

Configuration user role

The following functions are available in addition to the Maintenance user role:
– Run system configuration.
– Change the Display Unit settings.
8.1.5

Administration user role

The Administration user role is not always visible depending on the
configuration. If the user role is required but not visible, please contact
DrägerService.
The following functions are available in addition to the Configuration user role:
|
Instructions for use
REGARD 3000
|
en
User roles
141