Safety-Related Information; Conventions In This Document; Meaning Of The Warning Notes - Dräger REGARD 3000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

|
en

Safety-related information

15 Glossary ....................................................................................................
16 Annex ........................................................................................................
16.1
1
Safety-related information
These instructions for use can be downloaded electronically in further languages
from the technical documentation database (www.draeger.com/ifu) or can be
obtained from Dräger in printed form.
– Before using this product, carefully read these instructions for use and those of
the associated and connected products (e.g. transmitter, alarm device).
– Strictly follow the instructions for use. The user must fully understand and strictly
observe the instructions. The product is only permitted to be used for the
intended use; otherwise the protection provided by the device may be impaired.
– Do not dispose of the instructions for use. Ensure that they are retained and
appropriately used by the product user.
– Only trained and competent users are permitted to use this product.
– Comply with all local and national rules and regulations associated with this
product (e.g. EN/IEC 60079-14).
– Only trained and competent personnel are permitted to inspect, repair and
service the product. Dräger recommend a Dräger service contract for all
maintenance activities and that all repairs are carried out by Dräger.
– Use only genuine Dräger spare parts and accessories, otherwise, the proper
functioning of the product may be impaired.
– Do not use a faulty or incomplete product. Do not modify the product.
– Notify Dräger in the event of any component fault or failure.
– Do not operate in explosion-hazard areas. This device is neither approved nor
certified for use in areas where combustible or explosive gas mixtures are likely
to occur.
– Follow the directions of EN/IEC 60079-29-2 for measurement of flammable
gases or oxygen.
– Follow the directions of EN 45544-4 for measurement of toxic gases or oxygen.
2

Conventions in this document

2.1

Meaning of the warning notes

The following warning notes are used in this document to notify users of possible
dangers. The meanings of the warning notes are defined as follows:
Alert icon
100
Abbreviations ..................................................................................
Signal word
WARNING
Consequences in case of nonob-
servance
Indicates a potentially hazardous situation.
If not avoided, it could result in death or
serious injury.
Instructions for use
182
183
183
|
REGARD 3000

Publicité

Table des Matières
loading

Table des Matières