Manage Users; Set Automatic Login - Dräger REGARD 3000 Mode D'emploi

8.6.1

Manage users

Personalised users can be created locally with the user administration. A role must
be assigned to every user.
To create a new user:
1. Select
 A list of all current users is displayed.
2. Select
 The New user input screen is displayed. (The fields marked with * are
3. Enter the desired user ID (max 15 characters, lower-case letters and digits) in
the User ID/Login: input field.
4. Enter the name of the new user (max 15 characters, lower-case letters and
digits) in the Name: input field.
5. Enter the password for the new user (min. 4 digits, max. 8 digits) in the
Password: input field.
6. Confirm the password in the Verify password: input field.
7. Select the desired role in the Role dropdown list.
8. Select
 The new user is displayed in the user list.
To delete a user:
1. Select
2. Select the user that is to be deleted.
3. Select and confirm
To edit a user:
1. Select
2. Select the user that is to be edited.
3. Select
4. Make the desired changes and confirm.
The User ID cannot be changed for an existing user.
8.6.2

Set automatic login

If automatic login is enabled, the user is automatically (without entering a password)
logged in with the set role after 30 s. Automatic login is also run after automatic
logoff from another role. Automatic login is only available for the View only and
Operation roles.
To set up automatic login:
1. Select
2. Select the desired users in the Auto Login: dropdown list (only users with the
View and Operation user roles are displayed) or select OFF to disable automatic
login.
|
Instructions for use
REGARD 3000
> User management.
.
mandatory fields.)
to confirm all entries.
> User management.
.
> User management.
.
> User management.
|
en
User roles
163