Display Unit Settings; Administration Role - Dräger REGARD 3000 Mode D'emploi

|
en
User roles
corresponding Modbus fault code.
8.5.6.3 Acknowledgement parameter menu
For further information see: "Acknowledgement parameter menu", page 155.
8.5.6.4 Inhibit parameter menu
For further information see: "Inhibit parameter menu", page 156.
8.5.7

Display Unit settings

To set the Display Unit name and channel display restrictions:
1. Select
2. Enter a name for the Display Unit in the Dashboard tag: input field.
3. Enter individual channels (e.g. 1, 2) or channel ranges (e.g. 5-10) in the
Channel restrictions: input field.
Operation user roles.
To set the language:
1. Select
2. Select language from the dropdown list and confirm.
 The language is changed.
To set the date and time:
1. Select
2. Set the current date in the Date area with
3. Select the dropdown list in the Time zone: area and select the time zone.
4. Set the current time in the Time (h, min, s): area with
the set language, the corresponding time format is displayed.
To set the default view that is displayed after user login:
1. Select
2. Select the dropdown list in the Default view: area and select the preferred view.
3. Select the dropdown list in the Auto scroll speed: area and select the preferred
setting.
Setting options: Off, Fast, Normal, Slow
Default setting: Off
8.6

Administration role

The Administration user role is not always visible depending on the
configuration. If the user role is required but not visible, please contact
DrägerService.
After logging into the system the default view will be displayed (configurable). For
further information, see the following chapter: "Display Unit settings", page 162.
162
If the function is disabled, an invalid request will be answered with a
> Settings > Basic settings.
The Channel restrictions: setting is only valid for the View only and
> Settings > Language settings.
> Settings > Date and time settings.
> Settings > View settings.
and .
and . Depending on
|
Instructions for use
REGARD 3000