Approved Components For Functional Safety And Measuring; Function For Combustible Gases, Oxygen And Toxic Gases; Accessories Relevant For Approval - Dräger REGARD 3000 Mode D'emploi

Standards:
Test number:
Measurement technology for toxic gases as well as the measurement of
oxygen deficiency and oxygen enrichment
Test body:
Standards:
Test number:
Functional safety
Test body:
Standards:
Certificate:
3.6.4

Approved components for functional safety and measuring

function for combustible gases, oxygen and toxic gases

The following components have been tested and approved for operation in safety
and measuring functions:
Module
4-20 mA Input Module / HART 2/4 Ch
Relay Module 4/8 Ch
Slotcover
Docking Station
The following display elements and software components have been tested and
approved for operation in a measuring function:
Module
Display Unit
Modbus RTU Gateway Module
REGARD configuration software
3.6.5

Accessories relevant for approval

Designation
REGARD 3000 Cabinet Wire Harness 2 m
|
Instructions for use
REGARD 3000
EN 60079-29-1:2016
EN 50104:2019
EN 50271:2018
BVS 21 ATEX G 001 X
DEKRA Testing and Certification GmbH
EN 45544-1:2015
EN 45544-2:2015
EN 45544-3:2015
EN 50271:2018
EN 50104:2019
PFG 21 G 002 X
TÜV Rheinland Industrie Service GmbH
EN 50402:2017
IEC/EN 61508-1:2010
IEC/EN 61508-2:2010
IEC/EN 61508-3:2010
968/FSP 2339.00/21
Software version
≥ 01.01.05
≥ 01.00.10
N/A
N/A
Software version
≥ 01.00.02
≥ 01.00.10
≥ 01.04.06
System overview
Order no.
37 04 261
|
en
105