Control; Log User In Or Out - Dräger REGARD 3000 Mode D'emploi

1. Supply the system with electric voltage.
 The light ring is briefly illuminated in red.
 The Display Unit displays the start-up screen.
 The modules start and the communications LEDs on the modules and the
 During the start-up phase, the SSR and, if faults are detected, also the SFR
 All connected transmitters are powered up and start.
 All modules are activated in a random order when the system is started. This
 An unconfigured module generates a fault when the system is started, which
depending on the system setup, system size and system configuration. These
expire independently, but may also be latching in certain cases. The latching
states can be acknowledged manually via the Display Unit.
2. Configure the system for the desired functions. For further information see:
"Configuration role", page 147.
after configuration of the system. For further information see: "Save or import
configurations", page 149. This ensures that the system configuration can be
restored quickly in case of a fault.
3. Activate the horn.
6

Control

The system is operated via the Display Unit's touchscreen.
Direct operation at the modules is not possible.
6.1

Log user in or out

The following users are default settings:
User
administration
configuration
maintenance
view only
operation
To log a user in:
1. Select the desired user in the Select user dropdown list.
|
Instructions for use
REGARD 3000
assigned Ethernet ports start flashing as communication starts.
on the Docking Station are activated.
distributes inrush current peaks of the connected transmitters evenly and
ensures that the system starts without trouble.
is deleted by a valid configuration. When the configuration is sent the module
is linked to the slot.
After switching on the system, different special states may be encountered
Dräger recommends backing up the configuration to a USB storage medium
Password
1111
2222
3333
4444
5555
|
Control
role
Administration
Configuration
Maintenance
View only
Operation
123
en