Port Configuration 4-20 Ma Input Module / Hart 2/4 Ch - Dräger REGARD 3000 Mode D'emploi

|
en
User roles
8.5.4

Port configuration 4-20 mA Input Module / HART 2/4 Ch

8.5.4.1 Channel parameter menu
Information on the channel can be recorded in this menu.
Parameter
Disable channel
Channel ID
Channel tag
Channel group
level 1
Channel group
level 2
Channel group
level 3
Channel groups
Channel groups can be used for the logical grouping of functionally and/or
geographically linked plant sections, e.g. all transmitters and output elements of a
production hall. Up to 3 hierarchically classified channel group levels can be
formed. Note in this process that defined channel groups are not permitted to
contain sub-groups and channels simultaneously.
150
Description
Activate to disable a channel for current operation (e.g. if a
channel is not completely configured but channel settings
should be made). The state is retained after restarting the
system.
Specify channel number. The channel number is displayed
in the list and column view. Select NOP so that one channel
remains inactive and is not displayed.
Adjustable range: 1 to 1536, NOP
Descriptive text for this channel. The Channel tag is dis-
played in the list view.
Allocate channel to a logical group stage 1 (e.g. production
building 1). All channels of a group can be displayed
together in the list and channel view.
Allocate channel to a logical group stage 2 (e.g. level 1).
Allocate channel to a logical group stage 3 (e.g. room 1).
Instructions for use
|
REGARD 3000