Operation Mode / Internal - Ecolab Elados EMP II E60 Mode D'emploi

10.2.2

Operation mode / internal

The "internal" operation mode can be used to operate the metering pump without external
signals.
The following display options can be selected:
• Strokes/min
• Percent
Liter*
•
10.2.2.1 Selecting
417101438_EMP_II_E60
The configured metering speed (and thus the metering rate)
is displayed in strokes/min. (Default setting)
The configured metering speed (and thus the metering rate)
is displayed as a percentage.
The configured metering rate is displayed in litres/h
(optionally also in gallons/h).
For information on converting litres to gallons, see 10.3.4 "Configuration / unit"
Fig. 10.3 Operation mode / internal: selecting
- 101 - Rev. 12-01.19