Selecting; Configuration / Unit; Configuration / Code - Ecolab Elados EMP II E60 Mode D'emploi

10.3.3.1

Selecting

10.3.4

Configuration / Unit

If 'litre' is selected for the 'internal' operation mode (see chapter 10.2.2.2), this can be used to
change the display from litres/h to gallons/ h (1 gallon = 3,785 litres).
10.3.4.1 Selecting
10.3.5

Configuration / Code

With this setting, a four-digit number combination can be assigned to secure the setting
against unauthorized adjustment. If 'code' has been activated, the four-digit code must be
entered before configured values can be amended or the main menu can be accessed.
10.3.5.1 Selecting
417101438_EMP_II_E60
Fig. 10.16 Configuration / Language: Selecting
Default setting = German
Fig. 10.17 Configuration / Unit: Selecting
Default setting = litre
Fig. 10.18 Configuration / Code: Selecting
- Code query inactive.
(Default setting)
✓ Code query active.
see chapter
- 106 -
10.3.5.2
Rev. 12-01.19