10.3.14.1 Selecting; Microflow Plus / Stop Pump; Microflow Plus / Strokes - Ecolab Elados EMP II E60 Mode D'emploi

10.3.14.1 Selecting

Fig. 10.40 Configuration MicroFlow
10.3.14.2 MicroFlow
Fig. 10.41 Configuration MicroFlow
10.3.14.3 MicroFlow
417101438_EMP_II_E60
PLUS
: Selecting
PLUS / Stop pump
PLUS
/ Stop pump
PLUS / Strokes
- MicroFlow
(Default setting)
MicroFlow
✓
On activating
submenu appears with the following
menu items:
Menu item
• Stop pump
• Strokes
• Deviation
• Metering break
• Metering delay
•
Calibration
The "stop pump" function is used
to set whether or not the pump
stops if a "metering monitoring
alarm" is triggered.
- Pump is not stopped in the
event of an „Alarm metering
monitor function"
(Default setting)
Pump is stopped in the event
✓
of an „Alarm metering monitor
function"
Fig. 10.42 Configuration MicroFlow
The "Strokes" option is used to
specify the interval of strokes to
be monitored.
Setting range: 0-100
Default setting = 10 strokes
- 114 -
PLUS is inactive.
PLUS is active.
MicroFlow , a
PLUS
see chapter
10.3.14.2
10.3.14.3
10.3.14.4
10.3.14.5
10.3.14.6
10.3.14.7
PLUS
/ Strokes
Rev. 12-01.19