10.2
Operation mode
10.2.1
Selecting
Fig. 10.2
10.2.2
Operation mode / internal
The "internal" operation mode can be used to operate the metering pump without external
signals.
The following display options can be selected:
• Strokes/min
• Percent
•
Liter*
10.2.2.1 Selecting
Fig. 10.3
417101799_EMP_IV_E60.docx
The configured metering speed (and thus the metering rate)
is displayed in strokes/min. (Default setting)
The configured metering speed (and thus the metering rate)
is displayed as a percentage.
The configured metering rate is displayed in litres/h
(optionally also in gallons/day or gallons/h).
*
For information on converting litres to gallons, see
Adjustments
• internal
• pulse
• current
10.3.4
- 89 -
see chapter:
10.2.2
10.2.3
10.2.4
Rev. 9-06.11