Upgrading The Empiv E60 To The Empiv E60 Plus; Fitting The Dongle-Plate E60 Plus; Connector Assignments Dongle-Plate E60 Plus; Installation Ovalradzähler - Ecolab Elados EMP IV E60 Notice Technique

8 Upgrading the
To upgrade the
functions, obtain the additional dongle-plate from our range of accessories. (Part No.
249629).
For installation of the dongle-plate, please open the housing as shown in Chapter
8.1 Fitting the Dongle-plate
Fig 8.1
 Open the screw closures of Pos.
 Insert the dongle plate (Fig. 8.1, Pos. 1) into the now open connector of Pos.
(Fig. 8.1, Pos. 2).
 Close the screw closures of Pos.
8.1.1 Connector Assignments Dongle-Plate
Conductor
coloring
Pos.
(cable
connection)
25
brown
26
white
27
black
28
blue
29
Free for future use
30
8.1.2 Installation Ovalradzähler (OGM oder OGM
The oval gear meter function must be activated in menu first. If a OGM
NOTE
function oval gear meter is activated automatically.
(see chapter 10.3.11).
Abb. 8.3
417101799_EMP_IV_E60.docx
EMPIV E60 to the
EMP IV E60 to the EMP IV E60
PLUS
E60
Pos Description
X2
Terminal X2
1
Dongle-plate
Install the dongle-plate (Fig. 8.1, Pos. 1) on the terminal
provided for this purpose (Fig. 8.1, Pos. X2) on the mainboard.
Use the slots, Pos.
Description
Output 5 V
Bus line
Pulse input
GND
EMPIV E60
PLUS
and thus access the additional
19 to 24. (Fig. 8.1, Pos. 2) for this purpose.
19 to 24.
19 to 24 in order to fix the dongle plate in place.
PLUS
E60
PLUS
Connection OGM
PLUS
an Dongle-plate
25 + 26 + 27
Terminal Assignment
25 Output 5 V DC
26 Bus line
27
Relay input pulse
GND ( ┴ )
28
- 84 -
PLUS
Fig 8.2
Plus
is attached, the
PLUS
+ 28 Anschluss OGM
7.2.2
19 to 24
Rev. 9-06.11